CALL US TODAY
1-888-334-3233
The UF48B-D4 Steelheart Series Undercounter two section freezer with stainless drawers is a space-saving workhorse. Engineered to maintain food-safe temperatures in 100°F ambient conditions. With a net capacity of 12 cubic feet, this efficient undercounter freezer and front air flow design is perfect for hot/tight kitchens.
The UF48B-D4 is constructed of stainless steel, which protects this unit from accidental damage and rust. Plus, it is easy to clean.
Cabinet Construction: The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior features stainless steel back, sides, and floor with a stainless steel top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelves are adjustable in ½” increments. Cabinet walls are insulated with 2” CFC free, foamed in place polyurethane. 4” polyolefin, stem casters (two with brakes) are standard.
Drawer Construction: Drawer fronts are constructed of high grade stainless steel inside and out and drawers are insulated with 2” free foamed in place polyurethane. The bottom drawers will accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back. The top drawer will accommodate 4” deep pans with either orientation. The top drawer will also accommodate (1) ½ size pan & (1) 1/3 size pan 6” deep at the front of the drawer opening and provide capacity for (1) ¼ size pan and (1) 1/6 size pan 4” deep in the rear of the drawer. HS-5432 is recommended for this configuration. Drawer frames are formed of 16 gauge stainless steel and securely fastened in the cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
Refrigeration System: The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient nonelectric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
This item is not warehoused by Williams Food Equipment, processing times, delivery times and availability may vary. If this item is required by a certain date, please contact Williams Food Equipment before ordering to ensure delivery times can be met. It may not be possible to cancel this item once ordered and may be non-returnable. If returnable this item may be subject to restocking charges and return delivery fees outside of the control of Williams Food Equipment. If you have any questions about this item or the terms above, please call us at 1-888-334-3233 or email us at commercial@williamsfoodequipment.com
| Product Specifications | |
|---|---|
| Brand | Hoshizaki |
| Model | UF48B-D4 |
| Type | Freezers - Undercounter |
| # of Drawers | 4 |
| Interior Storage Capacity | 12 cu. ft. |
| Refrigerant | R290 |
| Refrigerant Charge | 2.6 oz |
| Plug | NEMA 5-15P |
| Cord Length | 10' |
| Electrical | 115V / 60Hz / 1Ph |
| HACR Breaker | 15.0 Amps |
| Voltage Range | 104-126 |
| Ambient Temp. Range | 45° to 100°F |
| Control Setpoint Range | -10° to 10°F |
| Amps | 4.0 |
| Energy Consumption (kWh/day) | 3.60 |
| Heat Rejection (BTU/Hr.) | 756 |
| Approx. Nominal Compres. BTU/HR | 1426 (1/3HP) |
| Dimensions - DWH | 31" x 48" x 33.75" |
| Warranty | 5 Years Labour / 6 Years Parts / 7 Years Compressor |
| Certifications | AQ / cETLus / NSF |
| Material | Stainless Steel |
| Series | Steelheart |
This program is for a restaurant or commercial kitchen owner needing longer timelines for larger purchases.
Financing your commercial kitchen equipment has never been faster or easier. Approvals within 24 hours.
For start-ups,
expansions &
renovations
Approved in
24 hours or less
12 - 60 month
terms available
Projects from
$1,000 - $1M
Own equipment
at the end of
the term
Payments tax
deductible
If you are looking for a short term solution, our easy rent-to-own program may be right for your restaurant or commercial kitchen business.
Rent-to-own is the solution with maximum flexibility for you and your business.
Try equipment
before buying it
Open Contract -
Buyout anytime
Convert rental
to lease
Low weekly
payments
Payments tax
deductible
Three easy
end-of-term options
