BUNN - iMIX-3 Hot Beverage System w/ 3 Hoppers - 36900.6000 Description
Sleek, eye-catching powdered beverage dispenser featuring advanced mixing technology delivers exceptional hot drinks.
- Spring-loaded, all metal auger drive system for easy hopper installation
- Capacity: Three 8lb (3.6kg) hoppers
- High efficiency LED lighted front graphics for merchandising
- Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service set up and calibration
- Low product detection system alerts audibly and with message on display when hoppers are low
- Alphanumeric display communicates advertising messages, machine status and technical support contact information
- 4.4gal (16.7L) hot water tank to meet peak serving times
- Iced Coffee and other displays available
- Auger motors with RPM feedback monitoring assure consistent flavors and profits by controlling powder dosing
- Night mode to prevent pilferage
- Cup clearance at 7.25" (18.4cm) to accommodate popular cup sizes [adjustable to 8.12" (20.6cm)]
- High speed heavy-duty whipper for complete product mixing
This item is not warehoused by Williams Food Equipment, processing times, delivery times and availability may vary. If this item is required by a certain date, please contact Williams Food Equipment before ordering to ensure delivery times can be met. It may not be possible to cancel this item once ordered and may be non-returnable. If returnable this item may be subject to restocking charges and return delivery fees outside of the control of Williams Food Equipment. If you have any questions about this item or the terms above, please call us at 1-888-334-3233 or email us at commercial@williamsfoodequipment.com
| Product Specifications | |
|---|---|
| Brand | Bunn |
| Model | 36900.6000 |
| Type | Hot Beverage Dispensers |
| Series | iMIX |
| Water Access | Plumbed |
| Color | Black |
| # of Hoppers | 3 |
| Hopper Capacity | 3 x 8 lb (3.6kg) |
| Door Hinge | Side |
| Dispense | Push Button |
| 8oz / 236ml Cups/hr | 72 |
| Input H²O Temperature | 60°F (15.5°C) |
| PSI Required | 20-100 |
| kPa | 138-689 |
| Fitting Supplied | 1/4" Male Flare Fitting |
| Volts | 120 |
| Dimensions - H x W x D | 32.8" x 12.6" x 24" |
| Dimensions - cm | 83.3 x 32 x 61 |
| Warranty | 2 Years Parts / 1 Year Labour / 3 Years CBA |
