AccuSharp - Classic Knife and Tool Sharpener

The tungsten carbide sharpeners of the AccuSharp are of high grade industrial quality and are one of the hardest materials known. 

How To Use:

To use, place knife on table or counter-top with the cutting edge up and about 1/2" of the blade tip extending past the edge of the surface. While holding the knife handle with one hand, hold the AccuSharp with your fingers through the opening formed by the handle and the finger guard. The Sharpener moves while the tool being sharpened remains stationary.

Straddle the knife's cutting edge near the handle of the knife with the "V" notch formed in the sharpener. With the head of the AccuSharp at about a 90 degree angle to the knife's edge, press down LIGHTLY using thumb pressure and draw the AccuSharp past the point of the blade. You will feel the tungsten carbide sharpeners removing the metal from the knife. Several passes in this manner may be required before you knife's cutting angle conforms to the proper angle of the AccuSharP. Once that angle is achieved, then two or three passes should be sufficient to bring you knife back to a sharp edge.

• Made in the USA.
• Lifetime warranty.
• Commercial grade reversible blades.
• Sharpens your knives quickly, easily and accurately.
• Renew your edges in an instant.
• Safety hand grip prevents cuts.
• Diamond-honed tungsten carbide blades.