True - Spec Series 35" Stainless Steel Roll-Thru Heated Cabinet w/ Solid Swing Doors - STR1HRT89-1S-1S

• Cabinet designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C).
• Heating system controlled by exterior on/off switch and electronic temperature control.
• Two (2) stainless steel (for corrosion resistance), finned tube heating elements (1000 watts each) for uniform generation of electric heat.
• Cabinet comes with a total of 2000 watts.
• Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet.
• Fans are controlled by exterior on/off switch.
• Manually controlled vent located on top of the cabinet for positive humidity control.

• Exterior - Stainless steel door, front & sides.
• Interior - Stainless steel side walls, back, floor, door liner, & ceiling.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).
• One (1) heavy gauge stainless steel ramp per door.
• Designed to accept roll-in racks (inboard castors) with maximum dimensions of 27"L x 29"D x 72"H (686 mm x 737 mm x 1829 mm) (supplied by others).

• Lifetime guaranteed bolt style door locks standard.
• Lifetime guaranteed heavy duty all metal working door handles.
• Positive seal self-closing doors with 120° stay open feature.
• Lifetime guaranteed external cam lift door hinges, three (3) per door section.
• Magnetic door gasket of one piece construction, removable without tools for ease of cleaning.

• Incandescent interior lighting.
• Lights activated by exterior on/off switch.
• Safety shielded.

• Exterior, colour coded, temperature display; accurate direct reading of internal cabinet temperature.
• Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product.
• Interior bumpers protect cabinet walls from abuse caused by rollin carts.
• 12" x 20" (305 mm x 508 mm) pan for water included, if additional humidity is required.
• NSF/ANSI Standard 4 compliant for open food product.

• True requires that a sole use circuit be dedicated for the unit.
• Unit completely pre-wired at factory and ready for final connection to a 115/208-240/60 Hz. single phase, 20 amp dedicated outlet.
• Cord and plug set included.

This item is not warehoused by Williams Food Equipment, processing times, delivery times and availability may vary. If this item is required by a certain date, please contact Williams Food Equipment before ordering to ensure delivery times can be met. It may not be possible to cancel this item once ordered and may be non-returnable. If returnable this item may be subject to restocking charges and return delivery fees outside of the control of Williams Food Equipment. If you have any questions about this item or the terms above, please call us at 1-888-334-3233 or email us at commercial@williamsfoodequipment.com