This Range Match Broiler with a 36" (914mm) width is designed to match GF sentry series ranges. This unit features a stainless steel front, sides, and backguard and an exclusive lift-off stainless steel grease hopper. Dual sided cast iron broiler racks have 1/2" (13mm) rounded bars (broad) in 6" (152mm) wide sections. Simple set Hi-Lo valves are located away from heat and protected. 15,000 BTU cast iron burners for every 6"(152mm) of broiling width. This charbroiler also features a flame protection system with Piezo ignition.
*NOTE: Image differs from product. The 24" model is shown.
- Natural gas
- Stainless steel front, sides, front rail, hopper & side splash guards
- Stainless steel low profile back-guard
- Exclusive lift off hopper top
- Removable broiling grates 23" (584mm) deep in 6" (152mm) wide sections
- Dual-sided cast iron broiler racks, 1/2" (13mm) rounded bar (broad) in 6" (152mm) wide sections
- Heavy duty ceramic briquettes
- 4" (102mm) sanitary legs for counter mount installations
- Flame failure protection
- Hi-Lo valves
- Piezo Spark Pilot Ignition
- 3/4" N.P.T. rear gas connection
- Gas pressure regulator
- 15,000 BTU cast iron burners for every 6" (152mm) of broiler space
- 1 Year warranty
This item is not warehoused by Williams Food Equipment, processing times, delivery times and availability may vary. If this item is required by a certain date, please contact Williams Food Equipment before ordering to ensure delivery times can be met. It may not be possible to cancel this item once ordered and may be non-returnable. If returnable this item may be subject to restocking charges and return delivery fees outside of the control of Williams Food Equipment. If you have any questions about this item or the terms above, please call us at 1-888-334-3233 or email us at commercial@williamsfoodequipment.com
Product Specifications | |
---|---|
Brand | Garland |
Model | GF36-BRL |
Series | GF Sentry |
Type | Charbroilers |
Fuel Type | Natural Gas |
Control Type | Manual |
Spark Ignition | Piezo |
Total BTU | 90,000 |
kW | 26.4 |
Manifold Inlet Size NPT | 3/4" |
Manifold Operating Pressure | 4.5" WC / 10 Mbar |
Legs | 4" (102mm) |
Dimensions - DWH | 34.5" x 36" x 25-1/8" / 876 x 914 x 638 mm |
Certifications | CSA Flame / CSA Star / NSF |
Warranty | 1 Year |
Material | Stainless Steel |
Briquettes | Ceramic |